How to Identify Your Units Tag

A step-by-step technical guide to locating, reading, and decoding the identification nameplate on your hydraulic pumps, motors, and valves.

Back to Resources

Bosch Rexroth A10VSO Variable Displacement Pump Tag
Figure 1: Variable Displacement Piston Pump Nameplate (Rexroth A10VSO Series).

Tag Type 01

Variable Displacement Pump Nameplate

Piston pump nameplates contain the complete technical DNA of the unit. On this typical Bosch Rexroth A10VSO nameplate, several distinct data fields define exact operating specs:

  • TYP (Model Code): A10VSO 18 DFR / 31R-VUC62N00 indicates an A10VSO open-circuit axial piston pump, 18 cc displacement, DFR pressure/flow compensator, 31 series revision, clockwise rotation (R), and standard nitrile seals.
  • MNR (Material Number): R902504298 is the crucial 10-digit part number required to source exact factory drop-in replacements.
  • SN (Serial Number): 37867413 uniquely identifies the individual manufacturing record and calibration test.
  • FD (Date Code): 24W20 designates production during Week 20 of 2024.
  • Rotation Indicator: A directional arrow confirms clockwise (CW) rotation viewed from the drive shaft end.
Critical Check: Always verify the rotation indicator before installation. Installing a pump with reverse rotation will result in immediate dry-run cavitation and catastrophic failure.

Directional Spool Valve Tag Assembled in USA
Figure 2: Directional Control Valve Nameplate (4WE6 Series – US Assembly).

Tag Type 02

Directional Spool Valve Nameplate (US Assembly)

Directional valves control flow paths across hydraulic actuators. This nameplate illustrates an industrial 4-way, size 6 spool valve assembled in the United States:

  • TYP (Model Code): 4WE 6 J62 / EW110N9DAL/62 breaks down as: 4 main ports, W (directional spool), E (solenoid operated), size 6 (D03 / NG6 interface), J spool pattern, 62 series, and an EW110 110V AC electrical solenoid.
  • MNR (Part Number): R978017736 uses the R978 prefix, which designates factory assembly in North American manufacturing facilities.
  • FD (Date Code): 57502 represents the internal factory production date and plant batch code.
  • SN (Serial Number): 4247127 tracks quality inspection testing.
Spool Letter Importance: The spool designator (in this case J) determines fluid routing in the center de-energized condition (open center, closed center, or tandem center). Always cross-reference this letter closely.

High-Pressure Directional Valve 350 Bar Tag
Figure 3: 4WE6 High-Pressure Solenoid Valve Tag with 350 bar Rating.

Tag Type 03

High-Pressure Directional Valve Tag (350 Bar)

Many heavy mobile and industrial applications run at elevated pressures up to 350 bar (5,076 PSI). This nameplate identifies a 24V DC solenoid-operated valve engineered for high-pressure duty:

  • TYP (Model Code): 4WE6J6X/EG24N9K4 specifies a size 6 directional valve, 6X series revision, EG24 (24V Direct Current coil), and K4 heavy-duty individual electrical connection plug (DIN EN 175301-803).
  • MNR: R900561288 — the standard global material number for this popular specification.
  • pmax: 350 bar indicates maximum working pressure at ports P, A, and B.
  • Plant Code: 7201 indicates manufactured at the Lohr am Main, Germany primary facility.
Voltage Identification: Note the EG24 code in the model string. Always confirm whether your system operates on 12V DC, 24V DC, or 110/220V AC before ordering replacement coils.

Pilot Operated Directional Valve 4WEH 22 Series Tag
Figure 4: Electro-Hydraulic Pilot Operated Directional Valve (4WEH 22 Series).

Tag Type 04

Pilot-Operated Directional Valve Tag (Size 22)

When flow rates exceed the capability of direct-acting solenoids, pilot-operated valves (designated by the H in 4WEH) are employed. The tag on the main valve body identifies the entire multi-stage assembly:

  • TYP (Model Code): 4WEH 22 D77/6EG24N9ETK4/B10 specifies a size 22 (ISO 4401 D08 interface) valve, D spool pattern, 77 series, 24V DC pilot stage, internal pilot oil supply (E), and internal pilot drain (T) with a B10 orifice plug.
  • MNR: R900937356 directly links to the full bill of materials including both pilot valve and main stage spool spring tolerances.
  • FD (Date Code): 27506 confirms manufacturing date and series release.
Pilot Oil Routing: The letters E and T on 4WEH tags are vital. They specify whether pilot pressure and drain are routed internally through the subplate or externally via auxiliary ports X and Y.

Proportional Directional Valve 4WRZE Tag with Integrated Electronics
Figure 5: Proportional Valve Tag (4WRZE 10 with On-Board Electronics).

Tag Type 05

Proportional Valve with On-Board Electronics (OBE)

Proportional valves deliver variable, metered flow and pressure rather than simple on/off switching. The letter Z in 4WRZE signifies proportional operation, while E denotes On-Board Electronics (OBE):

  • TYP (Model Code): 4WRZE 10 E85-73/6EG24N9ETK31/F1M designates a size 10 proportional valve with progressive flow characteristics, 85 L/min nominal flow rating, integrated amplifier card, and an F1 signal interface (e.g. 0-10V or 4-20mA control).
  • MNR: R901026885 contains the calibrated factory firmware and zero-point mechanical offset for that specific unit.
  • SN: 180046923 records factory calibration bench data.
Command Signal Check: When replacing proportional valves with OBE, always check the signal specification (voltage vs. current loop). Swapping a 0-10V unit with a 4-20mA unit will prevent the machine controller from communicating with the valve.

Size 22 Directional Spool Valve Tag 4WEH 22 E
Figure 6: High-Capacity Pilot-Operated Valve (4WEH 22 with E-Spool).

Tag Type 06

High-Capacity Directional Valve (E-Spool Configuration)

This nameplate illustrates another common variation in industrial manifolds: a size 22 valve with an E center-position spool:

  • TYP (Model Code): 4WEH 22 E76/6HG24N9ETK4/B10 features an E spool (all ports blocked in neutral), series 76, with heavy-duty wet-pin DC solenoids (6HG24).
  • MNR: R901108958 ensures the proper internal centering springs and pilot throttle orifices are matched to your circuit backpressure.
  • FD (Date Code): 17326 provides factory traceability for internal seal kit compatibility.
Spool Centering Springs: In large valves, internal centering springs must match pilot response requirements. Ordering strictly by the 10-digit MNR eliminates the risk of incorrect spool centering speeds.

Directional Poppet Seat Valve Tag M-3SEW 6 Series
Figure 7: Directional Poppet / Seat Valve Nameplate (M-3SEW 6 Series – 420 Bar).

Tag Type 07

Directional Poppet / Seat Valve Tag (420 Bar)

Unlike spool valves which feature inherent microscopic clearance leakage, directional seat/poppet valves (SEW series) utilize hardened balls and seats to achieve true zero-leakage holding in load-retention circuits:

  • TYP (Model Code): M-3SEW6U3X/420MG24N9K4 designates an M (solenoid operated), 3-way, SEW (seat valve), size 6, U function, 3X series revision, and 420M ultra-high pressure rating (420 bar / 6,090 PSI).
  • MNR: R900566283 confirms the zero-leakage seat configuration and internal poppet hardening.
  • Electrical Rating: 1,25A 24DC specifies 1.25 amp current draw at 24 volts direct current.
Zero-Leakage Applications: Poppet valves are standard on clamping, hydraulic presses, and safety lock circuits. Always confirm the pmax = 420 bar marking when replacing high-pressure poppet valves.

European Production Tag with Serial and Plant Indicators
Figure 8: Factory Stamped Tag with Serial and Plant Origin Codes.

Tag Type 08

European Production Tags & Factory Codes

When sourcing replacement hydraulic valves for imported machinery (European, Asian, or South American manufactured), tags often include specialized certification stamps and secondary plant indicators:

  • Plant Origin Code: 7201 marks production in Lohr am Main, Germany, adhering to strict DIN ISO 9001 quality audits.
  • SN & Batch ID: 21718810 119 indicates the production lot number and individual test bench sign-off.
  • Series Revision (6X): The 6X revision indicates that installation dimensions remain standard (interchangeable within series 60–69) even if internal spools have been modernized.
Series Number Rule: If the tens digit of the series number matches (e.g., 6X = series 60 to 69), the external mounting footprint, subplate bolt pattern, and O-ring ports remain 100% physically interchangeable!

Special Proportional Valve Tag with Printed Hydraulic Schematic Symbols
Figure 9: Specialty Tag with Embedded Hydraulic Schematic Symbols and Port Designations.

Tag Type 09

Specialty Tag with Embedded Schematic Symbols

Certain advanced electro-hydraulic proportional valves feature laser-etched or printed schematic symbology directly on the metal faceplate to facilitate machine troubleshooting and port verification:

  • Port Designations: Identifies primary working lines A and B, supply pressure line P, and tank return line T directly on the tag face.
  • Solenoid Operators: Marks solenoid a and solenoid b, clarifying which actuator energizes each corresponding flow path.
  • TYP (Model Code): 4WRAE 10 W30-22/G24K31/F1V defines a size 10 proportional directional valve with FPM (Viton) seals (V), 24V DC power, and integrated electronics.
  • MNR: R900711868 represents the complete factory-calibrated assembly.
Deciphering Degraded Tags: Even if chemical exposure or heavy wear removes the text, identifying the physical port stampings (P, T, A, B) and schematic symbol blocks allows our engineers to identify the correct replacement.

Need Help Decoding Your Unit’s Tag?

Can’t read a worn nameplate, or need an exact factory cross-reference for an obsolete code? Take a clear photo of your tag or casting numbers and send it directly to 4HG Source. Our team will decode it and quote OEM or remanufactured replacements fast.

Contact Our Experts

Intellectual Property Notice: The vector diagrams, illustrations, and technical reference layouts on this page are proprietary original works © 2026 4HG Source (Fourth Generation Hydraulic Solutions, LLC). All rights reserved. Unauthorized reproduction, digital scraping, or commercial republication is strictly prohibited.

Trademark Disclaimer: Bosch Rexroth®, Rexroth®, and associated product series, model codes, and trade dress are registered trademarks of Bosch Rexroth AG or their respective owners. Any reference to third-party manufacturers, trademarks, or part designations on this website is made strictly for identification, reference, and educational purposes to assist customers in locating compatible replacement components. 4HG Source is an independent hydraulic solutions provider and is not affiliated with, sponsored by, or endorsed by Bosch Rexroth AG.